Gano dacewar mara misaltuwa na MT Bakin Karfe's Alloy 25 da L605 Cobalt Alloy Forgings. Wannan samfurin mai ban sha'awa, mai ƙarfi yana ba da juriya na lalata, yana mai da shi manufa don aikace-aikace iri-iri kamar jirgin sama, ruwa, makamai, petrochemical, makamashin nukiliya, wutar lantarki, da ƙirƙira wutar lantarki. Alloy L605 na tushen cobalt yana ba da kaddarorin injiniyoyi waɗanda suka zarce ka'idodin kasuwa, kamar ƙarfin ƙarfi mai ban sha'awa na 930-1200 MPa da ƙarfin amfanin ƙasa na 690-760 MPa.MT Bakin Karfe yana tabbatar da cewa kowane samfurin ya bi AMS 5608,5772, 5796,5542/ ASTM F90. Za a iya keɓance kayan aikin cobalt ɗin mu gaba ɗaya don dacewa da ƙayyadaddun ƙayyadaddun ku daga 50mm zuwa 500mm a cikin kauri, 100mm zuwa 2000mm a faɗi, da tsayin 100mm zuwa 6000mm. Bugu da kari, muna bayar da jiyya na saman don haɓaka bayyanar da juriya na lalata, kazalika da matakan sarrafa inganci, gami da magani mai zafi da duba kayan aiki. Mu sadaukar da inganci da abokin ciniki gamsuwa a fili yake a cikin m samar da tsari. Daga shirye-shiryen kayan aiki da maganin zafi zuwa aiki na ƙarshe da taro, muna ba da tabbacin cewa Alloy 25 da L605 Cobalt Alloy Forgings ba komai bane. Dogara MT Bakin Karfe don Alloy 25, Alloy L605, da Cobalt Alloy Forgings bukatun. Gane bambancin Bakin Karfe na MT a yau.

Kayan abu	Cobalt Alloy
Daraja	Hayness188, Haynes25 (L-605), Alloy S-816, UMCo-50, MP-159, FSX-414, X-40,Stellite6B, da dai sauransu
Daidaitawa	AMS 5608,5772,5796,5542/ ASTM F90, da dai sauransu
Nau'in jabu	Kayan aiki, flanges, shafts, majalisai, da dai sauransu
Shiryawa	Pallet, Plywooden case, da dai sauransu
Aikace-aikace	Ƙirƙirar jiragen sama, ƙirƙira na ruwa, ƙirƙirar makamai, ƙirƙirar sinadarai, injin sarrafa makamashin nukiliya, ingantattun wutar lantarki, da injinan ruwa.

 

Cobalt Alloy Forging tsarin samarwa:
Shirye-shiryen kayan aiki da maganin dumama.
Shiri da jeri na ƙirƙira.
Aiwatar da matsin lamba don ayyukan ƙirƙira.
Girman girman da cire kayan da suka wuce gona da iri.
Yi maganin zafi don inganta kayan aikin injiniya.
Maganin saman yana inganta bayyanar da juriya na lalata.
Dubawa da kula da inganci.
Ƙarshe aiki da taro.

 

 

 

Kaddarorin injina don Alloy 25/L605:

Kauri	1 mm - 50 mm
Nisa	100mm-2000mm
Tsawon	100mm-6000mm
Ƙarfin ƙarfi	930-1200 MPa
Ƙarfin bayarwa	690-760 MPa
Tsawaitawa	25-35%
Yawan yawa	8.4 g/cm 3
Wurin narkewa	1320-1400 ℃
Tauri	230-300 HB
Ƙarshen saman	Kamar yadda aka yi birgima, pickled, goge, da sauransu

 

Karfe daraja	Fe	C	Si	Mn	Cr	Ni	W	Co
L605	1.6	0.1	0.6	1.5	20	10	15	Ma'auni

MTSCO Cobalt-Based Forging Alloy L605 wani ƙarfe ne mai ƙarfi mai ƙarfi wanda yake da juriya ga lalata, yana mai da shi cikakke don amfani a cikin yanayi mara kyau. Ƙirƙirar cobalt ɗinmu za a iya keɓancewa don biyan takamaiman buƙatunku, tare da kewayon kauri daga 50mm zuwa 500mm, faɗin kewayon 100mm zuwa 2000mm, da tsayin kewayon 100mm zuwa 6000mm. Tsarin mu na ƙirƙira yana tabbatar da cewa an rarraba kayan a ko'ina, yana sa ya zama cikakke don aikace-aikacen matsananciyar damuwa kamar injin jirgin sama, injin turbin, da kayan sarrafa sinadarai.

 

---

Na baya:Alloy L605 Cobalt Alloy Bar da Aka Yi Amfani da shi a cikin Reactor na ChemicalNa gaba:Hayness188 Cobalt Alloy Cold Rolled Sheet / Plate Amfani da Wutar Nukiliya

---