page

Egosiputara

Discover MT Stainless Steel's Nickel Alloy Rod Selection

Chọpụta Nhọrọ Ngwa Ngwa Nickel Alloy Steel MT


Nkọwa ngwaahịa

Mkpado ngwaahịa

MT igwe anaghị agba nchara na-anya isi n'inye ụkpụrụ kachasị elu na nickel Alloy C22 Wire, Bars, na ngwaahịa ndị ọzọ metụtara ya. Alloy C22 Waya anyị na-arụ ọrụ nke ọma na ma mbenata na ọnọdụ oxidizing, nke na-eme ka ọ bụrụ ihe zuru oke maka osisi multipurpose ma ọ bụ gburugburu nwere ike ịnweta ọnọdụ iwe.Our Nickel Alloy C22 bụ Ni-Cr-Mo-W alloy nke na-eme ka Ni-Cr ndị ọzọ -Mo alloys n'ihe gbasara arụmọrụ nguzogide corrosion zuru oke. N'ụzọ doro anya, ọ na-egosipụta nguzogide pụrụ iche megide pitting, crevice corrosion, na stress corrosion cracking. Ya elu resilience kwupụta oxidizing aqueous mgbasa ozi, gụnyere mmiri chlorine na ngwakọta na nitric acid ma ọ bụ oxidizing acids na chloride ion, bụ ihe atụ.Dịka a na-eduga soplaya na emeputa, MT igwe anaghị agba nchara na-ahụ na anyị Nickel Alloy Waya mmeri na iche iche ngwa dị ka okpomọkụ Exchangers. , condensers, na mbupu ụlọ ọrụ, nkenke igwe, n'ibu Ọdịdị ụlọ ọrụ, na ojiji na thermocouple & cables etc. All anyị ngwaahịa na-enweta ultrasonic ule, na nlezianya nyochaa ana achi achi 100% àgwà mmesi obi ike na nnabata na ISO & PED. Anyị na-ahụ na nickel Alloy C22 Waya na Bar na-ezute ụkpụrụ kachasị elu (ASTM B166, ASTM B446, ASTM B670, ASTM B335, ASTM B637, ASTM B574, ASTM B408, ASTM B425, wdg) ma na-enye nkwakọ ngwaahịa dị mma na pallet / plywooden case. / osisi reel iji hụ na nchekwa ngwaahịa n'oge transport.Họrọ MT igwe anaghị agba nchara maka ntụkwasị obi na inogide nickel Alloy C22 waya na Ogwe na-ekwe nkwa pụrụ iche arụmọrụ ọbụna n'ime ndị kasị sie ike ọnọdụ. Ogo kachasị elu na ntinye aka maka afọ ojuju ndị ahịa bụ ihe na-eme ka anyị pụta ìhè na ụlọ ọrụ ahụ.

Nickel Alloy C-22 bụ Ni-Cr-Mo-W Alloy nwere ike ịrụ ọrụ nguzogide corrosion kacha mma karịa Alloy Ni-Cr-Mo ndị ọzọ, gụnyere Alloy C-276, Alloy C-4 na Alloy 625. Alloy C-22 nwere nguzogide pụtara ìhè na pitting, crevice corrosion na stress corrosion cracking. Ọ nwere ezigbo nguzogide oxidizing aqueous media gụnyere chlorine mmiri mmiri na ngwakọta nwere nitric acid ma ọ bụ acid oxidizing nwere ion chloride.


Na MT igwe anaghị agba nchara, anyị na-eji mpako na-ewetara anyị elu-nke na-akara nickel alloy rod range nke a maara dị ka Premium Nickel Alloy C22 Waya na Bars. A na-enwekarị mkpanaka ndị a dị elu karịa alloys gụnyere alloy 625 / N06625, Alloy C276 / N0669, Alloy C276, alloy C276, alloy 800800, alloy 825 / N08825, Alloy 400 / N04400.Our nickel alloy rods na-emezu ụkpụrụ zuru ụwa ọnụ n'ihe gbasara mmepụta na ụkpụrụ nyocha. Ha na-agbaso ASTM B166, ASTM B446, ASTM B670, ASTM B335, ASTM B637, ASTM B574, ASTM B408, na ASTM B425. Iji hụ na ịdị mma na-enweghị atụ, anyị na-eji teknụzụ ịse oyi nke ọgbara ọhụrụ maka mmepụta ha. N'elu mkpanaka anyị bụ Bright Annealed ma ọ bụ Annealed Pickled dabere na ihe ndị a chọrọ, na-enye ha ezigbo ihe atụ. N'ihi ya, mkpanaka nickel alloy ọ bụla anyị na-emepụta na-aga na usoro siri ike nke nyocha ultrasonic. Usoro a na-adịghị emebi emebi (NDT) na-enye ohere maka nchọpụta nke ime na n'elu ntụpọ dị n'ime ihe siri ike, na-eme ka ọ dị ike nke ngwaahịa anyị. Nkwakọ ngwaahịa anyị kwa, bụ nke kachasị mma - site na pallets siri ike, ihe nchekwa plywooden na-adabere na reels osisi a pụrụ ịdabere na ya. , anyị na-ahụ na nchekwa na nchekwa nke ngwaahịa anyị n'oge njem. Na nke kachasị, mkpanaka nickel alloy anyị na-abịa na mmesi obi ike nke ntozu ISO & PED, na-eme ka nkwa anyị sie ike n'iwepụta naanị ngwaahịa kacha mma.

Ọkwa

Alloy 625 /N06625 , Alloy 600 /N06600, Alloy 601 /N06601, Alloy 718 /N07718, Alloy C276 /N10276, Alloy 800 /N08800, Alloy 825 /N0 8840 /N0

Ọkọlọtọ

ASTM B166; ASTM B446; ASTM B670; ASTM B335; ASTM B637; ASTM B574; ASTM B408; ASTM B425, wdg

Elu

Akpọchapụrụ na-egbuke egbuke/ Annealed Pickled

Nkà na ụzụ

Ihe osise oyi

NDT

Nnwale Ultrasonic

Nyocha

100%

Nkwakọ ngwaahịa

Pallet/ Ibe plywood/ Osisi osisi

Ntụkwasị obi ịdị mma

ISO & PED

 

Nickel Alloy C22Ihe mejupụtara kemịkalụ

%

Ni

Cr

Mo

Fe

W

Co

C

Mn

Si

P

S

V

min

itule

20

12.5

2

2.5

max

22.5

14.5

6

3.5

2.5

0.015

0.5

0.08

0.02

0.02

0.35

 

Ogwe / Rod

Waya

Dayameta dị n'èzí

≥10mm

2mm-5.5mm

Logologo

≤12000mm

-

Ibu

-

≤350KGS

stainless steel wire (49)

Ngwaa) Onye na-ekpo ọkụ
b) Condenser
c) Ụlọ ọrụ mbupu
d) Igwe eji eme nkenke
e) Mechanical Ọdịdị ụlọ ọrụ
f) Thermocouple & Cable wdg

Atụmatụ: Nickel Alloy C-22 bụ Ni-Cr-Mo-W Alloy nwere ike ịrụ ọrụ nguzogide corrosion kacha mma karịa Alloy Ni-Cr-Mo ndị ọzọ, gụnyere Alloy C-276, Alloy C-4 na Alloy 625. Alloy C-22 nwere nguzogide pụtara ìhè na pitting, crevice corrosion na stress corrosion cracking. Ọ nwere ezigbo nguzogide oxidizing aqueous media gụnyere chlorine mmiri mmiri na ngwakọta nwere nitric acid ma ọ bụ acid oxidizing nwere ion chloride. Ọ na-enyekwa nguzogide kachasị mma na gburugburu ebe a na-ezute ọnọdụ mbelata na oxidizing na iyi usoro. Ya mere enwere ike iji ya ebe ọnọdụ "iwe" nwere ike ime ma ọ bụ na osisi nwere ọtụtụ ebumnuche.

 

Nke gara aga:Osote:


N'ihe gbasara ihe mejupụtara kemịkalụ, mkpanaka nickel alloy (NiCrMoFeWCoCMnSiPSVminbalance2012) ka emebere maka nguzozi kachasị mma, na-enye ogo, ike na nguzogide enweghị atụ. Ngwakọta a na-eme ka ha bụrụ ihe dị ịtụnanya maka ojiji na ngwa ụlọ ọrụ dị iche iche n'ofe ngalaba, na-eme ka ọnọdụ MT igwe anaghị agba nchara dị ka onye na-eweta mkpanaka nickel alloy na-eduga. Tinye ego na mkpanaka nickel alloy anyị taa maka ogologo ndụ na arụmọrụ enweghị atụ.
  • Nke gara aga:
  • Osote:

    • Hapụ Ozi Gị