Na-ewebata Alloy 825 mmanya dị elu, ngwaahịa adịchaghị nke MT igwe anaghị agba nchara. Ogwe nickel alloy a pụtara maka nguzogide ya dị iche iche na corrosions dị iche iche, na-eme ka ọ bụrụ nhọrọ zuru oke maka ngwa ọgwụ na karịa. Ogwe mmanya/Rod nickel Alloy 825 anyị, kwekọrọ n'ụkpụrụ ASTM B425, na-egosipụta nguzogide dị ịrịba ama na mgbawa nrụgide corrosion nke ion chloride kpatara. Ọ na-ebilikwa iji belata gburugburu ebe nwere phosphoric na sulfuric acid na ntọala oxidizing na nitric acid na nitrates. Ọzọkwa, ọ na-enye nchebe na-enweghị atụ megide pitting, crevice corrosion, na intergranular corrosion.The Alloy 825 mmanya nwekwara exhibits ezi n'ibu Njirimara gafee a dịgasị iche iche okpomọkụ nso, si cryogenic okpomọkụ na moderately elu etoju, na-eru ruo 538 ℃. Kpọmkwem oyi na-adọrọ adọrọ ma na-egbuke egbuke, mkpanaka nickel alloy anyị dị na dayameta nke 10mm na n'elu na ruo 12000mm n'ogologo.MT igwe anaghị agba nchara anọwo na-ebute ụzọ nke mmepụta nickel alloy kemgbe 2011, na-enye ọtụtụ nkà na ihe zuru ezu. mmepụta teknụzụ ụlọ. Nyocha ngwaahịa anyị siri ike gụnyere akụrụngwa NDT dị elu maka ule Eddy ugbu a, ule Ultrasonic, na ule hydraulic. Anyị na-duly gbaara na ISO 9001 na PED asambodo, na ike na-enye ndị ọzọ Inspection Asambodo dị ka kwa ahịa chọrọ.Our Alloy 825 mmanya si elu ọnọdụ na-esetịpụ anyị iche na ahịa. Tinye ego na MT igwe anaghị agba nchara nickel Alloy 825 Bar/Rod - ngwakọta zuru oke nke ịdị mma adịchaghị mma, ịdịte aka na arụmọrụ dị elu.

Ọkwa	Alloy 825 /N08825, Alloy 625 /N06625 , Alloy 600 /N06600, Alloy 601 /N06601, Alloy 718 /N07718, Alloy C276 /N10276, Alloy 08040 / N10276, Alloy 08040
Ọkọlọtọ	ASTM B166; ASTM B446; ASTM B670; ASTM B335; ASTM B637; ASTM B574; ASTM B408; ASTM B425, wdg
Elu	Akpọchapụrụ na-egbuke egbuke/ Annealed Pickled
Nkà na ụzụ	Ihe osise oyi
NDT	Nnwale Ultrasonic
Nyocha	100%
Nkwakọ ngwaahịa	Pallet/ Ibe plywood/ Osisi osisi
Ntụkwasị obi ịdị mma	ISO & PED

Nickel Alloy825 Ihe mejupụtara kemịkalụ:

%	Ni	Fe	Cr	C	Mn	Si	S	Mo	Cu	Ti	Al
min	38	22	19.5					2.5	1.5	0.6
max	46		23.5	0.05	1	0.5	0.03	3.5	3	1.2	0.2

Atụmatụ:Alloy 825 nwere ezigbo nguzogide corrosion nrụrụ nke chloride-ion, na-ebelata gburugburu nwere phosphoric na sulfuric acid, gburugburu oxidizing nwere nitric acid na nitrates, na pitting, crevice corrosion na intergranular corrosion. Ọ nwere ezigbo n'ibu Njirimara na cryogenic okpomọkụ ka moderately elu okpomọkụ ruo 538 ℃

	Ogwe / Rod	Waya
Dayameta dị n'èzí	≥10mm	2mm-5.5mm
Logologo	≤12000mm	-
Ibu	-	≤350KGS

 

1 . Ụlọ ọrụ anyị raara onwe ya nye n'ịmepụta nickel alloy kemgbe 2011 , inwe teknụzụ mmepụta zuru oke yana ahụmịhe njikwa dị ukwuu.

2 . Anyị nwere akụrụngwa NDT dị elu maka ule ndị dị ka ule Eddy ugbu a, ule Ultrasonic, ule hydraulic na ihe ndị ọzọ.

3 . Anyị nwere ISO 9001 na PED akwụkwọ , na nke atọ ọzọ Asambodo Inspection dị ka TUV , BV , Lloyd's , SGS , wdg, nwekwara ike nyere dị ka ndị ahịa 'chọrọ.

4 . The elu ọnọdụ bụ otu n'ime anyị isi uru: iji izute dị iche iche chọrọ maka elu ọnọdụ, anyị nwere annealing na pickling elu, na-egbuke egbuke annealing elu, polished elu wdg.

5 . Iji mee ka ime ụlọ dị n'ime ọkpọkọ dị ọcha ma mee ka ọ ghara imebi ya, ụlọ ọrụ anyị na-emepụta nkà na ụzụ pụrụ iche na nke pụrụ iche - Sponge ịsacha na nrụgide dị elu.

6 . Anyị nwere ọrụ ire ere zuru ezu iji dozie nsogbu ndị ahụ n'oge.

---

Nke gara aga:Nickel Alloy C276 Round Bar/ Rod nwere elu na-egbuke egbuke ejiri na GeothermalOsote:Nickel Alloy 600/601 Waya nwere BA/AP elu Maka ahịrị injection kemịkalụ

---